Regeneration - Kärcher MIC 50 Handbuch

Stage 5 and last stage: The vehicle can only drive at a lim-
ited speed.
IMPORTANT: Drive the vehicle out of the hazard zone of
the traffic, and to the next safe place and park it.
13.8 Regeneration <Parked Stage>
Regeneration is only possible if the following conditions
are met. As soon as a condition is changed, the regenera-
tion process will stop.
 Neutral position
 Parking brake activated (automatic in neutral position)
 No display of error codes
 Accelerator not actuated
ATTENTION
Never interrupt the regeneration process, unless it is ur-
gently needed!
1. Drive to a safe place.
2. Park the vehicle in neutral position.
Text message: <Place in Park or Neutral>
3. Select idle speed.
4. Depending on the display, press <Un-inhibit Regen> or
<Inhibit Regen>.
5. Navigate to the menu <Settings | Machine | Parked Re-
generation> in order to start the regeneration process.
6. Press <Request Regen>.
7. The text message <Parked Regeneration Occurring>
appears in the display.
English 93