C) Main View Of Display For Programmes And Battery Parameters - VOLTCRAFT CHARGE MANAGER 2024 Bedienungsanleitung

c) Main View of Display for Programmes and Battery Parameters

The placement of the rechargeable battery charging chutes on the display corresponds to that on the charger.
The wheel encoder can be used to select the rechargeable battery charging chutes to display the detailed view.
Pushing „OK" causes the display of the selected chute to switch to the display of the charge chart.
1 Selected rechargeable battery chemistry of the left (S1/S3/S5/S7) and right (S2/S4/S6/S8) round cell charging
chutes: If no rechargeable batteries are inserted, „NO CELL" will be displayed.
2 Status display of the charging chutes „S1" to „S8": If the battery is being processed, the rechargeable battery
symbol or an arrow are displayed alternatingly. The currently active programme is displayed as well. If no
rechargeable battery is inserted, „- - -" is displayed.
3 Status display of the two 9 V block charging chutes „SA" and „SB"
4 Detailed view of the chosen charging chute
The following are displayed:
- Charge chute number (slot)
- Charge programme (e.g. „RECHARGE")
- Current step („STEP") and the entire number of programme steps
- Elapsed processing time in the format „DD/HH:MM" (DD = days, HH = hours, MM = minutes)
- Current rechargeable battery voltage (U)
- Charging and discharging current (I)
- Charging (C) and discharging capacity (D)
47