After a memory card has been inserted and correctly initialised, the display „SD CARD DETECTED" appears with
indication of the card capacity and the available memory.
The folders („FOLDERNAME") with the names „CM-LOG01" to „CM-LOG25" are available for recording. They will
later contain the stored data from the rechargeable batteries in CSV format.
The desired folder name is selected with the wheel encoder (turning to the left or right) and confirmed with „OK" (do
not turn the wheel encoder, just push briefly).
If a folder already exists (display „EXISTS! CHOOSE OTHER"), another folder must be chosen.
After confirmation, the inserted memory card goes through a compatibility test. If this is successful, the display will
change to „SD-STATUS: READY" and „INSERT CELL TO START"
Then the rechargeable batteries to be charged can be inserted.
45