F) Programme Cancellation; G) Rechargeable Battery Evaluation - VOLTCRAFT CHARGE MANAGER 2024 Bedienungsanleitung

Display of the charge charts at the charger:
The progress of the charge current and voltage curve across time can be displayed directly at the charger per
charging chute. For this, the desired charging chute is selected in the main view and confirmed with „OK".
By turning the wheel encoder, the display will switch between voltage and current progress and the combined view
of both. Pushing the wheel encoder again will return you to the main view.
Starting and end point of the Y-axis are marked, e.g., with Y=0.7-1.7V, while the X-axis shows the time from 0 to,
e.g., 00d08h (= 00 days, 08 hours). The axes are scaled automatically.
The charge shows no maintenance charge „TRICKLE".

f) Programme Cancellation

Cancelling a current rechargeable battery programme is possible either by removing the rechargeable battery from
the charging chute or by selecting „CANCEL PRG" under „OPTIONS".

g) Rechargeable Battery Evaluation

Evaluation of the rechargeable battery takes place automatically in the rechargeable battery programmes „CYCLE",
„ALIVE" and „MAXIMIZE". After completing the rechargeable battery programme, the result appears in four stages
„TOP" / „FIT" / „OK" / „BAD".
„TOP" represents the best and „BAD" a very bad rechargeable battery condition.
When the selection remains „CAPACITY undefined", the rechargeable battery is evaluated automatically by compa-
rison of the supplied to the removed capacity (display „RATIO"). The evaluation is to be observed relatively, since
the capacity indication of the rechargeable battery cannot be included in calculation.
A wrongly entered capacity value leads to wrong results in rechargeable battery evaluation. A still functio-
nal rechargeable battery may be evaluated as bad and a damaged one as „TOP".
51