Changing Displays And Viewing The Battery Status; A) Changing Displays; B) Viewing The Battery Slot Status - VOLTCRAFT 1893032 Bedienungsanleitung

11. Changing displays and viewing the
battery status

a) Changing displays

The LCD display (2) only displays the parameters for one battery
slot. You can view the parameters of each battery slot individually. To
display the parameters of the different battery compartments, follow
the steps below to change the display. Note the number of the battery
compartment on the LCD display (D) and the status LED on the battery
compartment (3).
• Press the up button ▲(5) or down button ▼ (7) to switch between
displays and show the parameters of the active battery slots. For
example, if you have only inserted 3 batteries, the display will
indicate the parameters of the three battery slots in sequence. If
all battery slots are occupied, you can move through the displays in
numerical order from 1 to 8.

b) Viewing the battery slot status

The Status LED (3) on each battery compartment indicates the status
of a process as ongoing/complete. The colour-coded status on LCD
display (2) indicates the current operating mode. The colours have the
following meaning:
If the status is orange, this indicates that the corresponding
battery is charging.
If the status is magenta, this indicates that the corresponding
battery is discharging.
If the status is blue, this indicates that the charger is checking
the status of the corresponding battery.
If the status is purple, this indicates that the battery is being
activated.
A tick indicates that the process for the corresponding battery
slot is complete. The charger will beep.
35