Filter Change Display; Display On/Off - Gaggenau rs 495 Gebrauchsanleitung

To activate the Setup mode:
Press the Door alarm/Setup mode button and hold
D
for 3 seconds.
A short text appears in the temperature display in the
freezer compartment temperature display for the
basic setting to be changed.
The current status of this basic setting appears in the
fridge compartment temperature displays.
Change the basic setting with the freezer
D
compartment B or Y sensor buttons.
Change the status with the fridge compartment
D
B or Y sensor buttons.
Press the Door alarm/Setup mode button and hold
D
for 3 seconds to save the settings and return to the
temperature display.
50

Filter change display

The appliance has two LEDs to indicate the status
of the fitted water filter cartridge:
Yellow LED:
The yellow LED lights up when 90 % of the maximum
water capacity has passed through the filter cartridge
or the filter cartridge is 11 months old.
This acts as a reminder to order a new filter cartridge.
Red LED (change display):
The red LED lights up when the maximum possible water
capacity has passed through the filter cartridge or the
filter cartridge is 12 months old.
The filter cartridge should be replaced immediately.
After changing the filter (see Chapter Water filter"),
the filter display must be reset.

Display On/Off

When this function is activated, the display is alternately
switched on and off.
To activate this function:
Press the display On/Off button.
D
To deactivate the function, press the function again.
D