Gaggenau rs 495 Gebrauchsanleitung Seite 44

5
Turn the feet (C) clockwise until they are firmly on the
ground.
6 Turn the adjusting screws (A) counter clockwise,
so that weight is distributed equally between the feet.
7 If the appliance is not standing straight:
Turn the adjusting screw (B) on the corner that
wobbles clockwise until the appliance is straight.
8 If the doors should have different heights after
aligning the appliance, these must be aligned as
follows:
Determine which door needs to be raised.
Turn the adjusting screws (A) on the side to be raised
until the doors have the same height.
If a door cannot be raised further, the other door
must be lowered by turning the adjusting screw (A)
counter clockwise.
44
9
Recheck for correct alignment with the spirit level.
10 Fit the supplied plinth cover from the front and fix in
place from above with the supplied screws.