Declaration Of Conformity - Bosch 0 607 251 102 Originalbetriebsanleitung

OBJ_BUCH-580-004.book Page 19 Monday, September 19, 2016 3:53 PM
Pneumatic Straight Grinder
Article number
0 607 ...
No-load speed n
0
Output power
Max. abrasive wheel-Ø
Tool holder
– Collet chuck-Ø 1/4"
– Collet chuck-Ø 6
Spanner size of
– clamping nut
– grinder spindle
Max. working pressure for tool
Thread size of hose connection
Inner diameter of hose
Air consumption at no-load
Weight according to
EPTA-Procedure 01:2014
Noise/Vibration Information
Measured sound values determined according to EN ISO 15744.
The noise level when working can exceed 80 dB(A). Wear hearing protection!
Typically the A-weighted noise level of the pneu-
matic tool is:
Sound pressure level L
pA
Uncertainty K
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 28927:
h
Grinding surfaces (roughing):
a
h
K
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN ISO 11148 and may be used to compare one pneumatic tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the pneumatic tool. However if the pneumatic tool is
used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An exact estimation of the level of exposure to vibration should also take into account the times when the pneumatic tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintaining the pneumatic tool
and the accessories, keeping the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents:
EN ISO 11148 according to the provisions of the directive
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY
Bosch Power Tools
... 260 100 ... 260 101
-1
min 22000 22000
W 290 290
mm 40 40

in –

mm –
mm 14 14
mm 10 10
bar 6.3 6.3
psi 91 91
1/4" NPT 1/4" NPT
mm 10 10
l/s 12.5 13
cfm 26.5 27.5
kg 0.54 0.54
lbs 1.1 1.1
dB(A) 72 72
dB 3 3
2
m/s < 2.5 < 2.5
2
m/s 1.5 1.5
Henk Becker
Executive Vice President
Engineering
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
English | 19
... 261 101 ... 261 102
26200 15000
400 400
30 50
– –
 
17 17
14 14
6.3 6.3
91 91
G 1/4" G 1/4"
10 10
16 6
33.9 12.7
0.64 0.64
1.3 1.3
75 69
3 3
2.7 3.1
0.8 0.8
Helmut Heinzelmann
Head of Product Certification
PT/ECS
1 609 92A 37S | (19.9.16)