Declaration Of Conformity - Bosch GEX 125 AVE Professional Originalbetriebsanleitung

OBJ_BUCH-1330-003.book Page 15 Wednesday, October 26, 2011 11:52 AM
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Assembly
Before any work on the machine itself, pull the mains plug.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:
Bosch Power Tools
Downloaded from www.Manualslib.com
Material Application
– Paint For sanding off paint
– Varnish
– Filling compound
For sanding primer (e. g., for removing brush dashes, drops
– Filler
of paint and paint run)
For final sanding of primers before coating
Expert for Wood For coarse-sanding, e. g. of rough, unplaned beams and
– All wooden materials boards
(e.g., hardwood, soft-
For face sanding and planing small irregularities
wood, chipboard, build-
ing board)
Best for Wood
For finish and fine sanding of wood
– Hardwood
– Particle Board
– Building board
– Metal materials
– Automotive paint For pre-sanding
– Masonry, stone
For shaping and braking edges
– Marble
– Granite
For final sanding and forming
– Ceramic
– Glass
– Plexiglas
– Glass-fibre plastics
For polish-sanding and rounding off edges
manuals search engine

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Engineering Director
Engineering PT/ESI
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 04.10.2011
English | 15
Grain size
coarse 40
60
medium 80
100
120
fine 180
240
320
400
coarse 40
60
medium 80
100
120
fine 180
240
320
400
coarse 80
medium 100
120
fine 180
240
320
400
very fine 600
1200
2 609 932 821 | (26.10.11)