Service Data; Energy Efficiency - JUNO JB121D0 Benutzerinformation

Problem
The display shows an error code
that is not in this table.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo"
.

14.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

15. ENERGY EFFICIENCY

15.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced mode
Number of cavities
Heat source
Volume
58 ENGLISH
Possible cause
There is an electrical fault.
The demo mode is activated.
.........................................
.........................................
.........................................
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Refer to "Using the settings
menu" in "Additional functions"
chapter.
Juno
JB121D0 949497017
81.2
A+
0.93 kWh/cycle
0.69 kWh/cycle
1
Electricity
72 l