Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

CTA 16÷800
CTA 16÷800
NOTE TECNICHE:
• media filtrante in fibra di vetro
• efficienza F6, F7, F8
• telaio in cartone resistente all'acqua
• l'80 % del materiale è riciclabile
• temperatura limite di utilizzo 70 °C
compatibilmente con la resistenza
degli altri componenti interni all'unità
• umidità relativa limite 100 %
• normalmente vengono adottati filtri
con dimensioni standard:
- mezzo filtro 594 x 289 x 97 mm
- filtro intero 594 x 594 x 97 mm
4.4.1 OPZIONI
• maggior spessore dei filtri; max 160 mm
• controtelaio e sistema di chiusura in acciaio inox.

4.5 FILTRI ASSOLUTI

I filtri assoluti vengono utilizzati dove vi è la necessi-
tà di controllare la contaminazione presente nell'aria
da immettere negli ambienti o da estrarre. Non a
caso l'impiego di questa tipologia di filtro riguarda il
settore ospedaliero, chimico ed elettronico.
Il posizionamento di questi particolari filtri avviene
nella parte terminale dell'unità dopo il ventilatore di
mandata, o di ripresa nel caso di estrazione. Per
aumentarne la durata e contenere i costi di gestione
dell'unità è bene adottare una sequenza di filtrazio-
ne accuratamente progettata, utilizzando prefiltri a
protezione di media efficienza (es. prefiltro sintetico
e filtro a tasche Fig. 12).
Tale sezione di filtrazione è comprensiva di porta
d'accesso la cui dimensione standard in larghezza
è di 460 mm.
Sul mercato è reperibile una vasta gamma di filtri
assoluti, diversi sia per dimensione e materiale fil-
trante, che per materiale del telaio.
Fig. 15: Dimensioni e quantità dei filtri a tasche e a celle su telaio
Dimensions and quantities of bag and panel filters on frame
FILTRI A TASCHE E A CELLE SU TELAIO / BAG AND PANEL FILTERS ON FRAME
592 X 287
CTA
(mm)
016
1
024
036
1
048
064
076
2
086
108
130
150
2
180
592 X 592
CTA
(mm)
230
1
260
1
320
2
360
2
400
2
430
4
500
4
560
4
600
4
800
6
TECHNICAL NOTES:
• fiberglass filtering stuff
• efficiency F6, F7, F8
• water resistant paperboard frame
• 80% of the material is recyclable
• working temperature limit 70 °C,
depending on the resistance of the
other components installed inside the
unit
• limit relative humidity 100%
• standard dimensions of filters normal-
ly used
- half filter 594 x 289 x 97 mm
- whole filter 594 x 594 x 97 mm
4.4.1 OPTIONS
• filters bigger thickness; max 160 mm
• stainless steeel counterframe and tightening system.
4.5 ABSOLUTE FILTERS
Absolute filters are used where there is the need
of taking care of contamination existing in the air to
inlet or exhaust from rooms. Therefore it is not by
chance that this type of filter is used in hospitals,
chemical and electronical industries.
These special filters are installed in the final part
of the unit after the supply or return fan, in case of
extraction. In order to extend their life and reduce
the operating costs of the unit it is important to
adopt a filtration sequence carefully planned, using
medium efficiency protective prefilters (for example
synthetic prefilter and bag filter Fig. 12).
This filtering section includes the access door of
standard width 460 mm.
A wide range of absolute filters is available on the
market and they are different either for dimensions
or filtering stuff or frame material.
592 X 287
592 X 592
(mm)
(mm)
3
6
5
6
3
9
3
9
12
3
12
7
12
5
15
5
15
24
63 CTA

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis