Stiga ST 1131 E Gebrauchsanweisung Seite 68

EN
2 3 SAFETY SIGNS (4)
Safety signs on the machine are designed to
inform the user as to the correct conduct to be
maintained when using the machine, in particular
for operations which require special caution and
attention.
2 3 1 Decals (4)
The decals (4:A) are affixed on the corpo mac-
china.
WARNING! If the regulations are not fol-
lowed, there is a risk of danger to life and
machine breakdown.
Read the instruction manual before using
the machine.
Keep bystanders at a safe distance.
Wear protective gloves
Always use hearing protectors.
Thrown object hazard.
Keep hands and feet away from rotating
parts. Risk of death and maiming.
Avoid injury from the rotating auger, keep
hands, feet and clothing away.
Do not touch any rotating parts before the
machine has stopped.
Disposed product shall be recycled accord-
ing to local regulations.
PLEASE STOP HERE
Any damaged or illegible decals must
be replaced
Order replacement decals from an au-
thorised assistance centre
4
Handle insertion limit decal.
ENGLISH
2 4 PRODUCT IDENTIFICATION LABEL
The identification label holds the following data
(see fig. 1):
1
CE conformity marking
2. Manufacturer's address
3
Acoustic power level
4. Type of machine
5. Serial number
6. Year of manufacture
7. Power supply frequency and voltage
8. Engine power
9. Dual insulation
10. Article code
11. Weight in Kg
Write your machine's serial number in the
space provided in the figure (1:142).
The identity of the product is determined by two
parts:
1 The machine's item and serial numbers:
2 The engine's model, type and serial num-
bers:
3
Use these means of identification whenev-
er you contact an authorized service work-
shop.
The example of the declaration of conform-
ity can be found on the second to last page
of this manual.
2 5 MAIN COMPONENTS (1)
The machine is made up of the following main
components (see fig. 1):
A. Handle
B. Starter switch locking device
C. Starter switch
D. Plug with cable
E. Cable support
F. Handgrip locking device
G. Handgrip
H. Shank
J. Stem locking device
K. Auger housing
L. Auger
(Translation of the Original Instructions)