Abicor Binzel iCAT Betriebsanleitung Seite 60

6 Putting into operation
6.8 Attaching the ABIROB
1
®
1
ABIROB GC torch neck
2 Protective cap
Fig. 13 Attaching the ABIROB
1 Equip the ABIROB
 Instruction leaflet BEI.0073.
2 Slide retaining nut (3) and protective cap (2) onto the ABIROB
the front.
3 Mount the ABIROB
iCAT ABIROB
4 Tighten ABIROB
iCAT ABIROB
5 Replace protective cap (2).
EN - 24
®
GC torch neck
2 3
3
Retaining nut
4 iCAT ABIROB
®
GC torch neck
®
GC torch neck (1) with tip adaptor, contact tip and gas nozzle.
®
GC torch neck (1) with positioning bore onto positioning pin (5) in the
®
GC (4).
®
GC torch neck (1) with retaining nut (3) on the
®
GC (4). Use a wrench AF20 suitable for this purpose.
5
®
GC
4
5
Positioning pin
®
GC torch neck (1) from
BAL.0139 • 2018-06-21
iCAT