Abicor Binzel iCAT Betriebsanleitung Seite 58

6 Putting into operation
6.6 Attaching the ABIROB
1
®
1 ABIROB A torch neck
2 Hexagon wrench
Fig. 11 Attaching the ABIROB
1 Equip the ABIROB
 Instruction leaflet BEI.0068.
2 Insert ABIROB
iCAT ABIROB
3 Tighten the set screws (4) with a hexagon wrench (2). Tightening torque M= 2.5 Nm.
EN - 22
®
A torch neck
3 iCAT ABIROB
®
A torch neck
®
A torch neck (1) with a tip adaptor, contact tip and gas nozzle.
®
A torch neck (1) via the guide grooves into the
®
A (3) as far as it will go.
2
®
A 4
3
5
2 set screws
BAL.0139 • 2018-06-21
iCAT