Adjusting Neutral Tint Density - Sony UP-D50 Gebrauchsanweisung

5
Press the G and g buttons to select the image to be
reprinted.
C O P Y P L A N E
p r e v / C U R R E N T
G g
Press and to display the desired
selection in capital letters.
Setting
CURRENT
PREV
6
Press the F and f buttons to select LAMINATION
F f
Press and to display
LAMINATION.
L A M I N A T I O N
G L O S S Y / m / t
Note
When the UPC-510 Color Print Pack is installed,
"******" is displayed on the LCD, and a lamination
pattern cannot be selected.
7
Press the G and g buttons to select the lamination
pattern.
L A M I N A T I O N
G L O S S Y / m / t
G g
Press and to display the desired
selection in capital letters.
Setting Adjustment Result
GLOSSY Prints image with a glossy effect.
MATTE Prints image with a matte (soft) effect.
TEXTURE Prints image with a silky texture.
8
Press the COPY button.
The selected image is printed with the new
lamination pattern.
After printing, the "COPY PLANE" setting resets to
"CURRENT."
Note
When the printer is turned off and back on, the
LAMINATION setting returns to GLOSSY.
18 Adjustments
Meaning
Select the image that was last sent to
the printer
Selects the next to last image that was
sent to the printer.

Adjusting neutral tint density

The density of an image's neutral tint can be adjusted by
changing the gamma value.
2,6 3,4,5
1
Press the ONLINE button to switch the printer off-
line.
Press the ONLINE button and OFF
LINE appears.
O F F L I N E
2
Open the front door and press the MENU button.
3
Press the G and g buttons to select PRINT SETUP.
G g
Press and to display PRINT
SETUP.
P R I N T S E T U P
c o l / P R N / s y s
4
Press the F and f buttons to select GAMMA.
F f
Press and to display GAMMA.
G A M M A
s / N O R M A L / h
1