Reprinting With A Different Lamination Pattern - Sony UP-D50 Gebrauchsanweisung

Adjusting sharpness
Sharpness can be adjusted in 15 steps, from 0 to 14.
The normal value is 7.
If this adjustment is set to 0, no sharpness
adjustment is applied. The sharpness of the printed
image will be the same as that sent from the
computer.
Adjustment Item Image Sharpness
SHARPNESS Outlines are blurred or emphasized
Pressing
emphasis of outlines.
Pressing
and blurs outlines.
S H A R P N E S S :
– – – – – – –
5
Press the ONLINE button to return to the online
mode, or the MENU button to return leave the
printer in the offline mode.
The display returns to normal condition for the
relevant mode.
g
increases the number and
G
decreases the number
7
– – – – – – –
Reprinting with a different
lamination pattern
When printing with the UPC-540 Laminated Print Pack,
you can reprint using a different lamination pattern.
Also, different lamination patterns can be selected for
each of two images stored in printer memory.
2,8 3,4,5,6,7
1
Press the ONLINE button to switch the printer off-
line.
Press the ONLINE button and OFF
LINE appears.
O F F L I N E
2
Open the front door and press the MENU button.
3
Press the G and g buttons to select PRINT SETUP.
G g
Press and to display PRINT
SETUP.
P R I N T S E T U P
c o l / P R N / s y s
4
Press the F and f buttons to select COPY PLANE.
F f
Press and to display COPY
PLANE.
C O P Y P L A N E
p r e v / C U R R E N T
1
Adjustments 17