DAB AQUAPROF BASIC Bedienungs- Und Installationsanleitung Seite 41

Control panel description.
1. Reset button; if a pump alarm occurs due to the lack of water, press the reset button. If the reset
button is not pressed during an alarm, it resets automatically after a preset time.
2. Operation selection button; press this button to select the automatic or "only" mains water
operations or vice versa.
3. Press the alarm button to turn the acoustic alarm off. Press the button to silence the alarm during
an alarm condition.
4. Button to manually set the differential tank suction level.
5. The yellow led lights when the pump is running.
6. The red led lights when the pump is in alarm; the led may light due to the lack of water, blocking
of the motor or pump, overheating of the motor.
7. A flashing green led indicates the manual operation, being the suction of the mains water, the
fixed light indicates the automatic operation, being the distribution of water from the tank if
present, if water is not present it automatically switches to the distribution of mains water.
8. The flashing green led means that the system is distributing mains water in automatic, the fixed
light means that mains water is being distributed in manual.
9. The fixed red led means that the acoustic alarm has been deactivated,
10. The fixed red led means that the hydraulic filling regulator is leaking, the flashing light means that
the 3-way valve is blocked or is not working correctly (only for systems with three-way valve
function control), an acoustic alarm is also activated with the fixed or flashing light.
11. The green led on means that the equipment is powered.
12. Tank water level indicators.
7. Maintenance
The system does not require periodic maintenance, possible faults are signalled on the control panel.
If an inspection of the unit is necessary, proceed as follows, it is in any case essential that the correct
in-flow and out-flow of cooling air is guaranteed.
!
WARNING
Before accessing the internal or external parts that are connected to the unit, disconnect the plug from
the mains socket, close the on-off valve and ensure that no one can reconnect the power supply or
open the valves during inspection.
•
Cabinet, check that it is clean and properly secured to the wall and that the front and back
sections are connected together correctly.
•
Float valve, make sure that the valve closes hermetically and that the float is able to move freely.
•
Control panel, check that the led light correctly based on the operation being performed.
•
Pump, check that it delivers the correct pressure and that is does not emit mechanical noises or
whistles.
•
Water leaks, check that the connections do not leak.
•
Sensors, make sure that the sensors are working correctly when cleaning the rain water
collection tank
The above mentioned operations can be performed every 6-12 months.
41
ENGLISH