ConMed Linvatec VP4726 Bedienungsanleitung Seite 50

Table 4: Guidance and Manufacturer's Declaration - Electromagnetic Immunity
E
The ConMed Linvatec
electromagnetic environment specified below. The customer or the user of this
VP47XXF
Immunity Test
a Field strengths from fixed transmitters, such as base stations for radio (cellular / cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to
fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the
applicable RF compliance level above, the
to verify normal operation. If abnormal performance is observed, additional measures may be
necessary, such as re-orienting or relocating the
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
VP47XX and VP47XXF
Monitor should assure that it is used in such an environment.
IEC 60601
Compliance Level
Test Level
VP47XX and
VP47XX
E-46
Monitors are intended for use in the
Electromagnetic environment
VP47XXF Monitors are used exceeds the
and VP47XXF Monitors should be observed
VP47XX and VP47XXF Monitors.
VP47XX /
guidance