ConMed Linvatec VP4726 Bedienungsanleitung Seite 26

Image Menu
E
❶
IMAGE SIZE
(Scaling mode) (Full; Fill Aspect; 1:1; Normal,
Anamorphic).
❷
GAMMA
BYPASS, 1.8, 2.0, 2.2, 2.4, 2.6, PACS).
❸
FILTER
Soft, Normal, Sharp, Sharpest).
❹
OVER SCAN
➎
IMAGE SETTING
(PRESET
USER 3).
➏
ZOOM / PAN
❼
FREEZE FRAME
Setup Menu
❶
LANGUAGE
(8 languages - Korean, English, French, Spanish,
German, Chinese, Japanese, Italian).
❷
OSD POSITION
(9 Positions).
❸
DURATION
will disappear after adjusting the duration
(5, 10, 20, 30, 60, 90, 120, 180, 240 seconds).
❹
RESET SETTINGS
to factory out-going status.
➎
AUTO SOURCE SELECT
auto source select. (ON: Searches through all
possible input sources until an active video source
is found. OFF: Video input is manually selected.)
➏
USER NAME ENTRY
Preset to the Users Name, etc.
- Change the image size
- Adjust GAMMA value (VIDEO,
- Set the sharpness of the image (Softest,
- Adjust the displayed size ( 0~8)
- Change the image setting
1, PRESET 2, USER 1, USER
- Enlarge the image.
- Freezes the image.
- Change the OSD language
- Change the OSD position
- Adjust time until the OSD Menu
- Changes all the OSD values
- Disable or enable
- Change the name of a
2,
E-22