Promise Technology VessRAID series Kurzanleitung Seite 25

Figure 22.LCD Panel default view
Making Manual IP Settings
To make Management Port settings manually:
1. Press the
2. Press the
If it says Link Status Down , reconnect to the network before preceding.
3. Press the
4. Press the
The current IP Address displays with the cursor under the first (extreme left)
digit.
5. Press the
Press the
To set an IP address with double- or single-digit octets, for example,
192.168.1.50, type zeros as placeholders, 192.168.001.050.
After you have set the last (extreme right) digit, press the
The current Subnet Mask displays with the cursor under the first (extreme
left) digit.
6. Make the needed changes the same as in step 5.
After you have set the last (extreme right) digit, press the
The current Gateway displays with the cursor under the first (extreme left)
digit.
7. Make the needed changes the same as in step 5.
After you have set the last (extreme right) digit, press the
The display says Save Network Setting?
8. Press the
The display shows the new IP address you set.
or button until the display says Management Port .
button and the display says Link Status Up .
or button and the display says IP Address.
button to make a change.
button to increment and the
button to move left and the
button to confirm.
Task 8: Setting the IP Address
button decrement.
button to move right.
25
button.
button.
button.