EC - Declaration of conformity
VALPES part-turn actuators of the type range:
are designed and producted, as electrical actuating devices, to be installed on industrial valves.
The VALPES company, as the manufatcurer declares herewith, that the above mentioned electric VALPES part-turn
actuators are in compliance with the following directives:
- Directive on Electromagnetic Compatibility (EMC)(89/336/EEC)
- Low-voltage Equipment Directive (73/23/EEC)
- Machinery Directive (98/37/EEC)
The compliance testing of the devices was based on the following standards:
1- concerning the Directive on Electromagnetic Compatibility
Immunity:
EN 61000-6-2 (1999)
Emissions: EN 61000-6-4 (2001)
2 - concerning the Low-voltages Equipment Directive
EN 60947-1 (1999)
VALPES part-turn actuators covered by this Declaration must not be put into service until the entire machine,
into which they are incorporated, has been declared in conformity with the provisions of the directive.
ZI CENTR'ALP
89 rue des Etangs - F 38430 MOIRANS
Tél.: (33) 04-76-35-06-06
Fax : (33) 04-76-35-14-34
E mail: info@valpes.com
Site web: www.valpes.com
We, declare under our responsibility that the products noted on the attached list have been designed and manufactured in accordance with
requirements of the directive. Mounting and connecting instructions defined in catalogues and technical data sheets must be adhered to by the user.
This declaration does not include any guarantee or certain characteristics.
ER10-20-35-45-60-100
EP150-200-300
EPI60-100-150-200-300
EO10-20
EW20-35-60-100
EK20-35-60-150
SR35-60-100
EBS.1/24-115-230
EBT.1/230
Moirans, le 10/09/2003
M. Boisserand, Managing Director