Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Operating Components Eco Version - Dibo IBH 1.780.020 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Operation

There are two possible serving panels for the type of IBH:
The serving panel for the ECO version and the serving panel for the FULL version.
In this chapter both serving possibilities will be explained.

4.1. Operating components ECO version

The ECO version is mounted of the parts like described underneath:
1. Burner switch
These is situated left on top of the ECO panel and has two positions with LED element inside the switch:
Turn to the right: burner on
Turn back to the left: burner off
2. Temperature regulating button
The temperature regulating button has been carried out as a turning button.
With the temperature regulating button the maximum temperature of the cleaning water can be adjusted:
- Turning button to the left is minimum temperature (1°C).
- Turning button to the right is maximum temperature (150°C).
Determine experimental with which spray pressure and at which temperature the best can be cleaned, without
damaging the object (for example: rubber - don't turn the button over 50°C).
A cleaning temperature of more than 95°C can only be reached by reduce the flow which provides the high pres-
sure pump. By moving the pressure regulator to left one reduces the number of l/min.
The temperature will rise maximum to the adjusted value indicated on the thermostat.
If the flow becomes too low, the flow switch will switch off the burner, this way the system prevents that the tem-
perature can exceed the critical value (= overheating).
3. Main switch
The main switch is mounted centrally on the serving panel and has a red colour with a yellow border.
The main switch has two positions:
- 0: OFF - stop
- 1: ON - Start (working position)
4. Manometer
On the manometer one can read the spray pressure.
5. Pressure regulator
The pressure regulator is mounted on the serving panel at the right side on top.
To adjust the pressure regulator, you have to open the protective cap of the cleaner.
On the pressure regulator is a grey turning button, which can adjust the spray pressure infinitely variable.
Turning the button to the right is a higher pressure (+).
Turning the button to left is a lower pressure (-).
The pressure can only be adjusted if the spray gun is served.
1.
1.
3
3
3
3
3
3
3
3
3
3.
.
.
.
.
2.
2.
DiBO n.v. 63
5
5
5.
5.
4
4 .
4
4
4.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis