Operation; Operation Cabinet; Pressure Regulator And Chemical Injection - Dibo ECN Serie Gebrauchsanweisung

4. Operation

4.1. Operation cabinet

The main switch has been carried out as a turn button switch and has two positions:
- 0 = OFF
- 1 = ON
If the machine has been carried out with a start/stopper system, the machine will stop 60 seconds after releasing
the gun. Command the spray gun and the machine starts automatically.
Turn button switch

4.2. Pressure regulator and chemical injection

1. Pressure regulator:
The pressure regulator is mounted at back on the left of the machine. On the pressure regulator sits a turning
button (not always present), with which the spray pressure can be established continues.
Turning the button to the right is a higher pressure.
Turning the button to left is a lower pressure.
The pressure can only be adjusted if the spray gun is operated.
The spray pressure is indicated on the manometer.
2. Chemical injection:
The chemical injection is mounted at the back on the left of the machine in the neighbourhood of the pressure
regulator. By turning the chemical injection to the right or the left, one can arrange the supply of the chemicals
(fi g 1). The other type of chemical injection is directly integrated on the valve and one can serve by a double
spray lance (fi g.2). This one isn't adjustable.
Fill the chemicals tank exclusively with permitted products.
Before taking the Unit in to use check if the used product is arranged to use with the material of the Unit. At
doubt get in touch with the salesman of the product or an acknowledged DiBO technician.
Remark: The kind of injection valve could differ and/or put on another place in the neighbourhood of the pres-
sure regulator, this is as the type of ECN.
DiBO n.v. 38
FIG. 1
Pressure regulator
Chemical injection