Environmental Protection - GGP ITALY SD98 Gebrauchsanweisung

1
The fuse capacity is indicated on the fuse.
IMPORTANT
ways be replaced by one of the same type and
ampere rating, and never with one of another
rating.
If problems persist, contact Your Dealer.

7. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of
considerable importance when using the ma-
chine, for the benefit of both social coexistence
and the environment in which we live.
– Try not to cause any disturbance to the sur-
rounding area.
– Scrupulously comply with local regulations and
provisions for the disposal of waste materials
after sawing.
– Scrupulously comply with local regulations
EN 24
A blown fuse must al-
6.3.6 Dismantling, replacing and remounting
the blades
WARNING!
gloves when handling the blades.
1
WARNING!
blades must always be replaced; never try
to repair them! ALWAYS USE ORIGINAL
BLADES BEARING THE SYMBOL
Only blades with the following codes must be
used on this machine:
IMPORTANT
should be replaced together, especially when
there are slight differences in wear.
and provisions for the disposal of oils, petrol,
damaged parts or any elements which have a
strong impact on the environment; this waste
must not be disposed of as normal waste,
it must be separated and taken to specified
waste disposal centres where the material will
be recycled.
– At the time of decommissioning, do not pollute
the environment.
Always wear work
Damaged or bent
82004346/0 (98 cm)
82004357/0 (108 cm)
Both of the blades
!