GGP ITALY SD98 Gebrauchsanweisung Seite 84

PROBLEM
6. The blades do not engage or
do not stop promptly when
they are disengaged
7. Uneven cut
8. Unusual vibrations while
working
9. Uncertain or ineffective
braking
10. Erratic forward movement,
poor drive when going up-
hill or if the machine has a
tendency to rear up
11. With the engine running,
the machine does not
move when the drive
pedal is pressed
(for hydrostatic drive
models)
If problems continue after having carried out
these operations, contact your dealer.
EN 26
LIKELY CAUSE
– problems with engagement
mechanism
– cutting deck not parallel to the
ground
– blade cuts badly
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– the brake is not adjusted
correctly
– problems with the belt or the
engagement device
– move the disengagement lever
to position «B»
SOLUTION
– contact Your Dealer
– check pressure and the external
diameter of the tyres (
or contact your Dealer
– contact Your Dealer
– clean the cutting deck (
– contact Your Dealer
– check and tighten all the engine
and frame bolts
– contact Your Dealer
– contact Your Dealer
– move it to position «A» (
WARNING!
plicated repair work if you don't have the
necessary equipment or the technical knowl­
edge. The warranty is automatically voided
and the manufacturer is not held responsible
if repairs are done badly.
6.3.1)
5.4.8)
4.33)
Do not take on com­