Safety; How To Read The Manual; General Safety Regulations - GGP ITALY SD98 Gebrauchsanweisung

1. SAFETY

1.1 HOW TO READ THE MANUAL

Some paragraphs in the manual containing
important information regarding safety and oper-
ation are emphasized in the following ways:
NOTE
IMPORTANT
further information on what has already been
said, in the aim to prevent damage to the ma-
chine.
WARNING!
result in the risk of injury to oneself or oth­
ers.
DANGER!
result in the risk of serious injury or death to
oneself or others.
This manual describes various versions of the
machine, which mainly differ as follows:
– type of transmission: with either mechanical
gear change or hydrostatic continuous speed
adjustment. The models with hydrostatic trans-
mission are identified by the word "HYDRO"
on the identification label (

1.2 GENERAL SAFETY REGULATIONS

WARNING!
using the machine.
A) TRAINING
1) Read the instructions carefully. Be familiar
with the controls and how to use the equipment
properly.
2) Never let children or people unfamiliar with
these instructions use the machine. Local regula-
tions can restrict the age of the user.
3) Never mow while people, especially children,
or pets are nearby.
4) Keep in mind that the operator or user is re-
sponsible for accidents or hazards oc curring to
other people or their pro perty.
5) Do not carry passengers.
6) All drivers should seek and obtain profes-
or
These give details or
Non­observance will
Non­observance will
2.1);
Read carefully before
– the inclusion of components or accessories
which are not widely available;
– special equipment fitted.
The symbol " " highlights all the differences
in usage and is followed by the indication of the
version to which it refers.
The symbol " " refers to another part of the
manual where further information can be found.
NOTE
ma chine, such as "front", "back", "left" or "right"
hand side, refer to the direction of forward travel.
IMPORTANT
For all operations
regarding the use and
maintenance of the
engine or the battery not
described in this manu-
al, refer to the relevant
manuals which form an
integral part of all the
documentation supplied
with the machine.
sional and practical instruction. Such instruction
should emphasise:
– the need for care and concentration when
working with ride-on machines;
– you cannot use the brake to regain control of
a ride-on machine sliding down a slope. The
main reasons for loss of control are:
– insufficient wheel grip;
– overspeeding;
– inadequate braking;
– the type of machine is unsuitable for its task;
– unawareness of the effect of ground condi-
tions, especially slopes;
– incorrect hitching and load distribution.
B) PREPARATION
1) While mowing, always wear sturdy footwear
and long trousers. Do not operate the equipment
barefoot or wearing open sandals.
Positions on the
EN 3