Identification Of The Machine And Components; Identification Of Main Components - GGP ITALY SD98 Gebrauchsanweisung

2. IDENTIFICATION OF THE MACHINE AND COMPONENTS

2.1 IDENTIFICATION OF THE MACHINE
The label located near the battery housing has
the essential data of each machine.
1. Acoustic po wer level according to directive
2000/14/CE
2. Conformity mark
according to directive 2006/42/CE
3. Year of manufacture
4. Operating engine power and speed
5. Type of machine
6. Serial number
7. Weight in kg
8. Name and address
of manufacturer
9. Type of transmission
(if indicated)
10. Article Code
The example of the declaration of conformity can
be found on the penultimate page of the manual.
2.2 IDENTIFICATION
OF MAIN COMPONENTS
The main components of the machine have the
following functions:
11. Cutting deck: this is the guard housing the
rotating blades.
12. Blades: these are what cut the grass. The
wings at the ends help convey the cut grass
towards the collector channel.
13. Side discharge chute: It is a safety guard
which prevents objects drawn up by the
blades from being thrown outside of the
machine.
14. Engine: this moves the blades and drives
the wheels. Its specifications and regulations
for use are described in a specific manual.
15. Battery: provides the energy for starting the
engine. Its specifications and regulations for
use are described in a specific manual.
16. Driving seat: this is where the machine
operator sits. It has a sensor connected to
EN 6
8 5
kW - /min
kg
3 9
Write your machine's serial
16
11 12
safety devices for detecting the presence of
the operator.
17. Regulation and safety labels: give
reminders on the main regaulations for
working safely, each of which is explained in
chapter 1.
4 7
L
WA
dB
6 10 2 1
number here (6)
15 17
13
14