Safety Instructions - Acteon SOPRO 617 Betriebsanleitung

• Do not expose the dental camera to water spray and do not store it in a humid environment (electrocution
risk).
• Install the dental camera in a clean, dry, and well-ventilated place.
• Disconnect the camera from the power supply if you are not going to use it for several days. Do not pull on
the cable.
• Never compress or nip the handpiece cable.
• Never expose the product to high vibrations.
• Do not drop the camera.
• This camera should in no way be immersed in any liquid, nor should it be autoclaved.
• The surface temperature in the light emission area can be just above 41°C (after several minutes using it).
So, avoid maintaining this emission area in contact with the patient's mouth.
• The SOPRO 617 camera is a product using class II LEDS according to IEC 60825. Do not stare at them in order
to avoid any ocular risk.
• For each new patient, it is essential to use the dental barriers provided with the camera or provided as a
complement. Before using the camera, make sure it does not have any sharp edges.
NOTE:
If the hygienic protection is torn while examining a patient or if the handpiece was "infected" while
withdrawing the hygienic protector, it is essential to totally disinfect the handpiece. In order to do this:
please refer to the maintenance chapter.
E N G L I S H

SAFETY INSTRUCTIONS

3
S o p r o 6 1 7 • U s e r m a n u a l
5 5