Installation - Acteon SOPRO 617 Betriebsanleitung

5.1. COMMISSIONING
Fastening the handpiece holder:
1. Choose a plain area that can be easily accessible for use;
2. Use the wipe provided to clean the surface on which you are going to fasten the holder;
3. Remove the double-sided tape adhesive protection that is on the holder, place it and press it several times
to correctly fix. The maximum sticking performance is obtained after two hours so avoid any stress on the
holder during this period.
CAUTION:
This holder is equipped with magnets that can damage devices sensitive to magnetic fields. Make sure you
do not install this holder near these devices (cathode ray tube video screen, magnetic videotapes, etc.).
5.2. FURTHER CONNECTION BOXES (optional)
You can install a connection box near each dental chair (no limitation). You will just have to transport the
handpiece from one chair to the other.
The handpiece holder is intended to maintain the connecting cable connector when the cable is not linked to
the handpiece.
When you disconnect the handpiece connecting cable to take it to another chair, or when you put the handpiece
on its holder, the last stored image displays on the screen* (or the last four if you were in four-image mode, or
the color-bar pattern if no image was stored).
*Except on Dock USB2.
E N G L I S H

INSTALLATION

5
S o p r o 6 1 7 • U s e r m a n u a l
11