Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 72

en 72 | FWA 4650 | Configuring network
10.2 Configuring WLAN network link
1. Select Start>>Control panel>>Network links.
 The Network links window opens up:
Fig. 82: Network links
1 WLAN network link (= wireless network link)
2 LAN network link
2. Click onto "Wireless network link" with the right
mouse key.
3. Select the "Properties" menu item.
 The "Properties of wireless network link" window
opens up:
Fig. 83: Wireless network link properties
1 Menu item "Internet protocol (TCP/IP)"
2 "Properties" button
4. Select the "Internet Protocol (TCP/IP)" item.
5. Click onto the "Properties" button.
|
1 690 706 220 2014-01-31
 The "Properties of internet protocol (TCP/IP)"
window opens up:
Fig. 84: Properties of internet protocol (TCP/IP)
1 Menu item "Use following IP address"
2 "IP address" input field
3 "Sub-net mask" input field
4 "OK" button
!
The IP address of the "wireless network link" must
be changed to the valid value.
6. Select the "Use following IP address" item.
7. Change the IP address in the "IP address" input field
to the valid value to configure/activate the WLAN net-
work adapter.
Valid network address
192.168.150.1
Tab. 25: Valid/invalid network address
8. Confirm with the "OK" button.
9. Close the Network link window.
 WLAN network link configured.
10. Re-start the PC/ Laptop.
11. Perform sensor assignment.
i
For sensor position assignment, refer to the docu-
ment Commissioning instructions 1690706006.
"
This completes start-up of the WLAN-Box.
Invalid network address
192.168.151.0
Robert Bosch GmbH