Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 52

en 52 | FWA 4650 | Installing WLAN adapter
6.2.2 Preparation
Ending programs
1. Close the program user interface "Aligner".
2. Use the right mouse key to select the program modu-
les Measurement server, RemoteControlEx, ILSV ser-
ver, Demo server and Licence server in the task bar
at the bottom right and end with the "Exit" button.
Fig. 18: Server task bar
1 Measurement server
2 RemoteControlEx
3 ILSV server
4 Demo server
5 Licence server
i
Depending on program version:
3. Close any open programs.
 Programs ended.
Provision of software
i
Software Center:
1. Download the driver and copy onto a storage medi-
um (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
 Provision of software via Software Center.
i
EDIS CD:
1. Start the EDIS CD on the service engineer's PC/
Laptop, search for the driver and copy onto a storage
medium (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
3. Or start the EDIS CD on the PC/ Laptop of the wheel
alignment unit and use the full text search function
to find the driver.
 Provision of software via EDIS CD.
i
Driver CD:
¶
Start the driver CD on the PC/ Laptop of the wheel
alignment unit.
i
The driver CD starts automatically (Autorun).
 Provision of software via driver CD.
|
1 690 706 220 2014-01-31
6.2.3 Procedure
!
The WLAN-Box must be switched on.
!
Keep to the sequence:
Start with driver installation and then connect the
WLAN adapter to the PC/ Laptop when prompted to
do so during installation.
Fig. 19: Wheel alignment unit manufacturer driver CD main menu
1. Press the "WLAN Driver + Settings" button or select
the Set-up file.
 The "WLAN Driver + Settings" selection window
opens up:
Fig. 20: WLAN adapter driver installation
2. Click onto the "WLAN USB Adapter Driver + Settings"
button.
Robert Bosch GmbH