Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 69

9.3 Vehicle target data
9.3.1 CD/ DVD
Wheel alignment unit manufacturer
1. Insert the vehicle target data installation CD/ DVD in
the drive.
 The CD/ DVD selection menu starts automatically.
i
If the menu is not started automatically, call up the
file AutoRunExec.exe in the CD/ DVD main directory
in the file manager.
Fig. 73: "Setup + Update" button in selection menu
2. Press the "Setup + Update" button in the menu.
 The installation program starts up.
i
The installation instructions can be opened by way
of the "Instructions" button.
Vehicle manufacturer
1. Insert the CD/ DVD in the drive.
 The CD/ DVD starts up in accordance with the
manufacturer's specifications.
2. Select the installation program in the selection menu
or the installation file in the file manager.
 The installation program is unpacked.
Fig. 74: Unpacking of installation program
 The installation program starts up.
Robert Bosch GmbH
Software installation | FWA 4650 | 69
9.3.2 Download
1. Copy the file loaded from the internet or company
network (installation and/or licence key) onto a sto-
rage medium (e.g. USB data carrier).
2. Connect the storage medium to the PC/ Laptop.
3. Select the installation file on the medium in the file
manager.
 The installation program is unpacked.
i
Refer to Vehicle manufacturer CD/ DVD for unpa-
cking.
 The installation program starts up.
9.3.3 Installation program
i
The program menu provides prompting for installa-
tion:
Fig. 75: Vehicle target data installation Welcome window
1. Press the "Continue" button.
Fig. 76: Vehicle target data installation Start window
2. Press the "Continue" button.
en
|
1 690 706 220 2014-01-31