Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 49

5.4 Wall installation (suggestion 4)
5.4.1 Fitting
i
WLAN-Box fitting procedure for:
$
4-column lifting platform
$
Scissor lift
$
Pit
1
2
3
4
Fig. 13: Suggestion 4 for fitting WLAN-Box on building wall
1 WLAN-Box
2 Cover for scissor lift hoses and cables
3 Operating unit
4 Building wall
i
When fitting on a 4-column lifting platform or in a
pit, any connecting cables to the WLAN-Box rout-
ed close to the ground must be provided with an
additional cover for protection and to guard against
tripping. When fitting on a scissor lift, use should
also be made of the lift cover.
Robert Bosch GmbH
Mechanical and electrical installation | FWA 4650 | 49
1. Unfasten the screws (6 x) securing the housing cover
of the WLAN-Box.
i
Refer to Section 5.1.2 Wiring, Fig. 6 for unfastening
the securing screws.
2. Detach the cover.
Fig. 14: Removing WLAN-Box fastening strip
1 Securing screws (4 x)
2 Fastening strips (2 x)
3. Remove the securing screws (2 x each) for the faste-
ning strips (2 x):
4. Select a position on the wall.
en
1
2
|
1 690 706 220 2014-01-31