Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 65

7.3.3 Re-connection
i
Function:
$
Monitoring of Bluetooth link
$
Re-connection of Bluetooth link
!
The "COM Re-Connect" program must be started and
configured to ensure proper, trouble-free operation.
i
Program path:
C:\PROGRAM FILES (x86)\TOSHIBA\BLUETOOTH
TOSHIBA STACK\COMReConnect.exe
1. Start the program file.
Fig. 64: "COM Re-Connect" program window
2. Select Bluetooth adapter.
3. Place a tick next to the adapter.
4. Place a tick next to "Place Icon in the Taskbar".
 The "COM Re-Connect" program is started auto-
matically on starting the computer.
Fig. 65: Program icon "COM Re-Connect" + active Bluetooth link
in task bar
 The program icon appears in the task bar.
Function
"Interval time" = Time until re-connection
"Link supervision timeout" = Time after which link in-
terruption is to be classed as an interrupt
Tab. 20: "COM Re-Connect" program window settings
"
This completes starting and configuration of the
"COM Re-Connect" program.
Robert Bosch GmbH
Installing USB hardlock | FWA 4650 | 65
8. Installing USB hardlock
Fig. 66: USB hardlock
i
The USB hardlock contains the licence for usage and
installation of the software for a specific device ver-
sion. There is a separate licence for each device.
!
This licence is essential for installation of the measu-
rement program/vehicle target data and operation of
the device.
¶
Connect the USB hardlock to the PC/ Laptop before
installing the measurement program.
i
Driver for USB hardlock:
$
The driver is included on the installation CD of
the measurement program.
$
It is installed and configured automatically during
installation of the measurement program (refer to
Installation of measurement program).
Value [s]
0
1
en
|
1 690 706 220 2014-01-31