Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 68

en 68 | FWA 4650 | Software installation
9.2.3 Installation program
i
The program provides menu-driven prompting for
installation.
Fig. 70: Measurement program installation Welcome window
1. Press the "Continue" button.
Fig. 71: Measurement program installation Start window
2. Press the "Continue" button.
|
1 690 706 220 2014-01-31
Fig. 72: Licence key query window
 The licence key query window is displayed.
3. Click onto the "Browse" button.
 The file manager opens up.
4. Select the drive and licence key file (extension: .lic).
 Installation continues automatically if the licence
key is valid.
i
The licence key can also be entered directly in the
form of a code.
i
The licence key query window is not called up in the
case of a software package with multiple licence.
i
Following completion of installation:
5. Remove the USB data carrier and CD/DVD from the
PC/ Laptop.
6. Re-start the PC/ Laptop.
i
After installation, there will be a menu entry in the
"All programs" menu and a folder for the measure-
ment program on the Desktop. The software is also
linked to the Autostart folder and starts up automati-
cally after booting the PC/ Laptop.
!
In the case of FWA 4650 wheel alignment units, the
network has to be configured after installing the
measurement program.
i
Refer to the "Network" Section for network configu-
ration.
!
In the case of 3D-12Cam wheel alignment units,
the positions of the sensors must be assigned after
installing the measurement program.
i
For sensor position assignment, refer to the docu-
ment Commissioning instructions for FWA 4630
1690706006.
"
This completes measurement program installation.
Robert Bosch GmbH