Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung Seite 57

7.2 Installation
7.2.1 Preparation
Ending programs
1. Start the wheel alignment unit PC/ Laptop.
2. Close the program user interface Aligner.
3. Use the right mouse key to select the program modu-
les Measurement server, RemoteControlEx, ILSV ser-
ver, Demo server and Licence server in the task bar
at the bottom right and end with the "Exit" button.
Fig. 35: Server task bar
1 Measurement server
2 RemoteControlEx
3 ILSV server
4 Demo server
5 Licence server
i
Depending on program version:
4. Close any open programs.
 Programs ended.
Provision of software
i
Software Center:
1. Download the driver and copy onto a storage medi-
um (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
 Provision of software via Software Center.
i
EDIS CD:
1. Start the EDIS CD on the service engineer's PC/
Laptop, search for the driver and copy onto a storage
medium (USB data carrier).
2. Start the storage medium on the PC/ Laptop of the
wheel alignment unit.
3. Or start the EDIS CD on the PC/ Laptop of the wheel
alignment unit and use the full text search function
to find the driver.
 Provision of software via EDIS CD.
i
Driver CD:
¶
Start the driver CD on the PC/ Laptop of the wheel
alignment unit.
i
The driver CD starts automatically (Autorun).
 Provision of software via driver CD.
Robert Bosch GmbH
Installing Bluetooth adapter | FWA 4650 | 57
7.2.2 Procedure
!
Keep to the sequence:
First install the software and the driver and then
connect the Bluetooth-USB adapter Bosch 2.0 to the
PC/ Laptop when prompted to do so.
Fig. 36: Driver CD – Bluetooth Stack for Windows by Toshiba
1. Press the Installation button or select the Set-up file.
Fig. 37: Preparation for installation – InstallShield Wizard
 The installation wizard starts up.
en
|
1 690 706 220 2014-01-31