Safety Precaution; Cleaning The Monitor; Recommendation To Use More Than One Unit; On Burn-In - Barco AMM215WTD Benutzerhandbuch

Safety Precaution

· Avoid placing the monitor, or any other heavy object, on the power cord
to prevent fire or electrical shock from damage to the power cord.
· Do not expose the monitor to rain, excessive moisture, or dust to avoid
fire or shock hazard.
· Do not cover the slots or openings of the monitor for proper heat
dissipation. Always put the monitor in a place where there is adequate
ventilation.
· Avoid placing the monitor against a bright background or where sunlight
or other light sources may reflect on the area of the monitor. Place the
monitor just below eye level.
· Handle with care when transporting the monitor.
· Refrain from giving the shock or scratch to the screen, as screen is
fragile.

Cleaning the Monitor

No specific liquid or chemical necessary when cleaning this LCD monitor
However, we suggest to clean the monitor with non-abrasive cloths and cleaning
solutions used in hospitals to clean similar equipment. We recommend using 70%
isopropyl alcohol for the screen surface and warm water and a mild detergent for all
other surfaces. Other acceptable cleaning agents are listed below:
• 70% isopropyl alcohol
• Cidex (2.4% glutaraldehyde solution)
• 0.5% Chlorhexidine in 70% isopropyl alcohol
To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away
from the monitor and spray cleaning solution onto a cloth. Without applying exces-
sive pressure, clean the screen with the slightly dampened rag.

Recommendation to Use More Than One Unit

As unforeseen situations can occasionally occur for the monitor, when the display
is used please use a safety control. It is strongly recommended you use more than
one unit or prepare a spare unit in case there is an emergency.

On Burn-in

Permanent burn-in may occur from the following:
• Displaying color bar or static images repeatedly or for a long period of time.
• Using the unit repeatedly in a high temperature/ high humidity environment
• Displaying an image smaller than the monitor continuously.
To reduce the risk of burn- in, it is recommended to turn off the power of the unit,
and reduce the brightness when the unit is not in use.
AMM215WTD 9