Installing The Power Pack With Control Box; Inserting The Tool - HellermannTyton Autotool 2000 Automatisierungsanleitung

5 .2 .2 Installing the power pack with control box

4
3
f Remove screws from power-pack holder
1
f Slide power pack
over power-pack holder
4
below.
f Insert screws into holes
1
Automation Instructions CPK • 10-2015 •106-29009
.
2
from
2
and tighten.
3

5 .2 .3 Inserting the tool

CAUTION
1
Crush hazard when jaws close.
f Always keep the power pack CPK switched OFF
while installation is in progress.
1
2
4
f Turn adapter
on hanger
2
clears pin .
4
f Pull out pin and remove adapter
4
5
6
f Slacken screws
6
f Use the screws to secure adapter
f Insert the tool with the adapter into the mount on
hanger .
1
f Turn hanger until groove
1
opening for the pin.
f Fully insert pin .
4
3
; In operating condition the collar of the hanger prevents
the pin from slipping out.
Installation
3
until groove in the collar
1 3
.
2
in tool .
5
to tool .
2 5
in the collar clears the
3
2
15