ABB 2600T-Serie Bedienungsanleitung Seite 49

ABB S.p.A.
Lenno (Co) Italy
0474
0722
Abb. 1: Produktidentifikation
ABB S.p.A.
Made in Italy
Best.-Nr.
DF-H
NL-Nr
Membr./Füll.Messwerk
Flansch/Ansch.-Dicht.
H Membr./Füll.
L Membr./Füll.
Hilfsenergie
TS
max. Arbeitsdr.
LRL/URL
min/max Spanne
Eingestellt
2600T
Tag
DRUCKMESSUMFORMER
II 1/2 G Ex d IIC T6 - II 1/2 D Ex tD A21 IP67
T85°C FM09ATEX0023X - IECEx FME09.0002X
(-50°C<Ta<+75°C) POWER SUPPLY 42 Vdc/2W Max
II 1 G Ex ia IIC T6 - II 1/2 G Ex ia IIC T6 -
II 1 D Ex iaD 20 T85°C and II 1/2 D Ex iaD 21 T85°C
for electrical parameters see cert. FM09ATEX0024X
IP67 - IECEx FME09.0003X "FISCO Field Instrument"
II 3 G Ex nL IIC T6 - II 3 D Ex tD A22 IP67 T85°C
Ui = 42Vdc Ii < 25mA Ci < 13nF Li < 0,22mH
for electrical parameters see cert. FM09ATEX0025X
IECEx FME09.0004X "FNICO Field Instrument"
Serien\Nummer
DF-L
HW Rev. Bj:
PED:
Ausgang
PS
Bedientasten unter dem Schild
General Purpose IP67 Max.Supply Voltage 42 Vdc
XP (US) CL I/DIV1/GP ABCD, DIP CL II, III /DIV1/GP EFG,
FM
XP (Canada) CL I/DIV1/GP BCD, DIP CL II, III /DIV1/GP EFG,
US C
APPROVED CL I, ZONE 1, AEx/Ex d IIC T4 -50°C<Ta<+85°C
ENCL 4X T AMB=85°C "Seal not required" - "DUAL SEAL"
IS/Sec. Intrinseque (Entity) CL I, ZONE 0 AEx/Ex ia IIC T6,T5,T4
FM
CL I/DIV1/GP ABCD IS - CL II/DIV1/GP EFG - CLIII DIV1 when
US C
APPROVED
conn. per dwg DH 3173 ENCL 4X "FISCO Field Instrument"-"DUAL SEAL"
CL I, ZONE 2 AEx nC IIC T6,T5,T4
FM
CL I, ZONE 2 Ex nL IIC T6,T5,T4
US C
CL I/DIV2/GP ABCD NIFW when connected per drawing
APPROVED
DH 3173 ENCL 4X "FNICO Field Instrument" - "DUAL SEAL"
Druckmessumformer der Reihe 2600T Modelle 266 | SOI/266-XC Rev. D 49
1 Einführung
B
C
A