Specifying The Device Number To Pair It - Pioneer SGY-PM910H Bedienungsanleitung

Specifying the Device Number to Pair it

To specify the device number of the sensor, do the following procedure before searching for the sensor.
1
Check [Specified Search] in the sensor's pairing menu.
2
Tap [Device Number].
3
Enter the device number and tap
• See page 22 regarding the device numbers of the transmitters.
• When you input the device number, make sure that the number you specify is displayed in [Device Number] on the sensor's information
confirmation screen.
.
Pairing the Pedaling Monitor Sensor
EN
21