Assembling The Chainring And Installing The Right Transmitter - Pioneer SGY-PM910H Bedienungsanleitung

Assembling the Chainring and Installing the Right Transmitter

EN
Install the right transmitter on the right crank as you assemble the chainring.
If the chainring and chainring adapter have been removed, assemble the chainring and fasten the right transmitter according to
the following procedure.
• Refer to the instruction manual for the crank set you are using for the procedure to assemble the chainring.
1
Install the outer chainring on the spider arm.
• Install the right transmitter so it is on the outside of the chainring.
Do not install the right transmitter on the inside of the chainring.
2
Install the inner chainring.
Do not insert the chainring bolt at this time.
3
Install the chainring adapter.
Run the junction cable along the guide of the chainring adapter, line up the bolt holes as you overlay the chainring adapter
over the inner chainring.
32