Sivision 3 / Sirocam 3 / Sirocam C; Sirocam 3 Intraoral Camera (Additional Equipment) - Sirona C1+ Gebrauchsanweisung

17 SIVISION 3 / SIROCAM 3 / SIROCAM C

17.1 SIROCAM 3 Intraoral Camera (additional equipment)

17
SIVISION 3 / SIROCAM 3 / SIROCAM C
17.1
SIROCAM 3 Intraoral Camera (additional equipment)
3
2
1
60
4
The SIROCAM 3 intraoral camera in combination with
SIVISION 3 represents an outstandingly suitable system
for effective communication with the patient.
The camera images are not used for diagnosis!
The camera is a sensitive optical instrument and must
therefore always be handled with care.
*
The camera illuminates the parts of the teeth to be
exposed with 7 white-light LEDs (1).
These are arranged around the entry prism (2).
t 1 / t 2
The LEDs and optical system are protected by a
scratch-proof antiglare glass cover.
CAUTION
* = Intermittent operation of the camera.
The camera heats up during operation.
To avoid high temperatures of the camera this must be
set down after an operating time t1 for a period t2.
Please refer to the operating instructions of the SIRO-
CAM 3 for the times for t1 and t2.
Even when set down the camera heats up, because one
of the statuses of black image, white image or quad
image is always active.
The slide switch (3) is used for presetting the depth of
field.
The camera key (4) is intnded for controlling different
SIVISION 3 functions.
i
NOTE
Operation of the camera and further information are de-
scribed in the Operating Instructions for SIROCAM 3.
i
NOTE
The camera handpiece contains data making it possible
to restore the factory-set color definitions regardless of
the dental treatment center where the camera is used.
This makes it possible to use the camera at different den-
tal treatment centers. To adapt the individually wanted
color settings, a white balance can be seelcted with the
camera active (see basic setting dialog 1, chapter 15)
Sirona Dental Systems GmbH
59 06 446 D 3386
D 3386.201.01.08.02