Declaration Of Conformity - SATA FDG 24 Betriebsanleitung

Operating instructions SATA paint set 10, SATA FDG 24, SATA FDG 48

14. Declaration of Conformity

Manufacturer:
SATA GmbH & Co. KG
Domertalstrasse 20
D-70806 Kornwestheim
We hereby declare that the following product, due to
its conception, design and construction complies
with the basic safety requirements of the
Directive on Pressure Operated Machines 97/23/EU Module A (In-house
Manufacturing Process Control) section DIN EN 13445 and the Directive
94/9/EU including any changes valid at the time of issue of this declara-
tion and that it can be used in explosive areas (ATEX), annex X, B ac-
cording to the EU directive 94/9/EU.
Product Description: .................................................SATA FDG
Type Description: .......................................... SATA paint set 10,
....................................................... SATA FDG 24, SATA FDG 48
ATEX classification: .................................................... II 2 G T4
Corresponding EU directive
• EU directive 94/9/EU Geräte und Schutzsysteme zur bestim-
mungsgemäßen Verwendung in explosionsgefährdeten Bereichen (De-
vices and protection systems for the intended use in explosive areas).
• Directive for pressure devices 97/23/EG section module A (In-house
Manufacturing Process Control) DIN EN 13445
Applied harmonised norms:
• DIN EN 1127-1:2011 "Explosion protection Part 1: Basics and method-
ology"
• DIN EN 13463-1:2009 "Non-electronic devices for the use in explosive
areas - Part 1: Basics and Requirements"
• DIN EN ISO 12100-1/-2; „Sicherheit von Maschinen, Allgemeine An-
forderungen" (Operating Safety of Machinery, General Requirements)
• DIN EN 1953:2013 "Spray application devices for coating materials -
safety requirements"
Applied national norms:
EN
35