After Sale Service; Warranty / Liability; Spare Parts - SATA FDG 24 Betriebsanleitung

EN Operating instructions SATA paint set 10, SATA FDG 24, SATA FDG 48
Malfunction
Material pressure can-
not be adjusted

11. After Sale Service

For accessories, spare parts and technical support, contact your SATA
dealer.

12. Warranty / Liability

The SATA General Conditions of Sale and Delivery and further contractual
agreements, if applicable, as well as the valid legislation at the time apply.
SATA cannot be held responsible especially in the following
cases:
• When the operating instructions are disregarded.
• When the product is used in other than the intended ways of usage.
• When untrained staff is employed.
• When no personal protection equipment is worn.
• When no original accessories and spare parts are used.
• When the product is manipulated, tampered with or technically modi-
fied.
• In case of normal wear and tear.
• In case when the product has been exposed to untypical shockloads
and impacts during usage.
• Assembly and disassembly

13. Spare Parts [13]

13.1. Spare Parts SATA paint set 10
Art.
Description
No.
6981 SATA quick coupling nipple G 1/4 female thread (5x)
14233 Hand agitator, cpl. stainless steel version
17376 Brass pipe securing nut, G 1/4, nickel-plated
17921 Distributor for SATA pressure reducer
18937 Pressure gauge 0-10 bar, 50 mm
18945 Safety valve, G 1/4
18952 Material outlet, stainless steel, connection G 1/2
32
Cause
Defective material
pressure regulator
Corrective action
Replace the material
pressure regulator