3-Hand, Date; Models : K32-St02, K32-Rg02, K38-St02, K41-St02, S36-St02, S36-Rg02, S42-St02, S46-St02; 4-Hand, Gmt, Date Models - Georg Jensen C30-ST01 Bedienungsanleitungen

Operating Instructions: Quartz Watches
3-hand, date
Models : K32-ST02, K32-RG02, K38-ST02, K41-ST02, S36-ST02, S36-RG02, S42-ST02, S46-ST02
B
A
C
Setting the time:
1. Pull the crown out to position 3, its maximum extension. The second hand (C) will stop moving.
2. Turn the crown either clockwise or anti-clockwise until the watch hands (A and B) are positioned at
the desired time.
3. When the desired time is reached push the crown back to position 1 and screw down if applicable.
NOTE: When the hour hand passes 12 o'clock and the date changes, the watch is set at midnight. If
the date does not change, it is set at noon.
Setting the date:
1. Pull the crown out to position 2.
2. Turn the crown clockwise or anti-clockwise until the desired date is shown in the date window (D).
3. When the desired date is reached push the crown back to position 1 and screw down if applicable.
NOTE: Do not change the date between 10pm and 2am as this may damage the movement.
1 2 3
8
D
9
4-hand, GMT, date
Models : K41-ST04, S42-ST04, S46-ST04
A
C
Setting the time:
1. Pull the crown out to position 3, its maximum extension. The second hand (C) will stop moving.
2. T urn the crown either clockwise or anti-clockwise until the watch hands (A and B) are positioned
at the desired time.
3. W hen the desired time is reached push the crown back to position 1 and screw down if applicable.
NOTE: When the hour hand passes 12 o'clock, the watch is set at midnight if the date changes. If
the date does not change, it is set at noon.
Setting the date:
1. Pull the crown out to position 2.
2. Turn the crown clockwise until the desired date appears in the date window (D).
3. W hen the desired date is reached push the crown back to position 1 and screw down if applicable.
NOTE: Do not change the date between 10pm and 2am as this may damage the movement.
Setting the GMT / 2nd time zone hand(E):
1. Pull the crown out to position 2.
2. T urn the crown anti-clockwise to set the GMT / second time zone hand (E) to the desired time.
3. W hen the desired time is reached push the crown back to position 1 and screw down if applicable.
NOTE: The GMT hand (E) operates on a 24-hour scale. In other words, half the speed of the hour hand.
Please note that only even hours are marked.
24
B
1 2 3
8
E
12
D
1 0