Master Volume Knob; Rig Volume Knob; Undo/Redo Buttons; Usb - Kemper PROFILER Bedienungsanleitung

GETTING STARTED 19
(15)

Master Volume Knob

MASTER VOLUME is always global, and therefore not stored with any Rig. Changing the volume doesn't affect
the color of sound. Volumes of all analog outputs including HEADPHONE are linked to Master Volume by default.
These links can be activated and deactivated with soft buttons in the Output/Master Section (e. g. „Headphone
Link").
(16)

Rig Volume Knob

Rig Volume controls the relative volume of a Rig, and is stored as a part of it. Use this control to level out volume
differences between Rigs. All Kemper Factory Rigs are normalized at 0 dB. Besides the Volume parameters in
Stomps, Stack, and Effects you can use Rig Volume to adjust volume amongst Rigs. Again, changing the volume
doesn't affect the color of sound.
(17)

Undo/Redo Buttons

With the UNDO and REDO buttons you are able to revise, or step back-and-forth through your modifications of
the settings within the current Rig.
(18)

USB

Use the USB type A port to connect USB sticks for backups and firmware updates. Please consult the Reference
Manual for details. Head and PowerHead users find this port on the rear side.