Midi; S/Pdif Digital Input And Output; Speaker Output; Kensington™ Lock Connector - Kemper PROFILER Bedienungsanleitung

POWER AMPLIFIER

23
(9)

MIDI

Use these ports to connect the Profiler to MIDI equipment. You can send MIDI program changes to the MIDI IN-
PUT to switch between Rigs, and MIDI control changes to switch and control effects. If you send MIDI clock to the
Profiler, it will instantly sync its tempo, so tempo-dependent effects, like delay or tremolo, will adapt their timing.
(10)

S/PDIF Digital Input and Output

This is a digital input and output that can be used to connect the Profiler to other S/PDIF compatible devices,
such as certain computers and audio interfaces.
(11)

Speaker Output

Profiler PowerRack / PowerHead only. See chapter "Power Amplifier" for details.
(12)
Kensington™ Lock Connector
Here, you can connect a Kensington™ lock to protect your Profiler against theft.
Power Amplifier
The optional, built-in power amplifier allows you to connect your Profiler to 4, 8, and 16 ohm guitar cabinets, as
well as passive linear cabinets. It is internally cabled to the MONITOR OUTPUT, so all features of the MONITOR
OUTPUT are applied to the internal power amplifier as well. Please refer to the chapter "MONITOR OUTPUT" of