Noise Gate Knob; Output/Master Button - Kemper PROFILER Bedienungsanleitung

18 KEMPER PROFILER

Noise Gate Knob

This knob controls the Noise Gate, which eliminates the noise and hum of your guitar in a very smart way. Turn
the NOISE GATE knob to the right, until noise and hum have disappeared; do not turn it beyond that point, as
this might alter the sound of your guitar. When set to the appropriate position, you will notice that noise and hum
are eliminated, even when the strings still sound. There is no need for an additional release control as found in
classic noise gates. The Noise Gate settings can be stored as part of a Rig.
Like "Clean Sens", the Noise Gate setting is part of the Input Section, and is stored with the Rig as well as with
an Input Preset. When the Input Section is locked, the Noise Gate is locked as well. With the chicken-head set to
PROFILER Mode, the Noise Gate will also work with the connected amplifier, but without influencing the resulting
Profile.

Output/Master Button

This button brings the Output settings into focus. These are:
• Volume settings for different outputs
• Volume Link buttons to link and unlink the individual volumes to the MASTER VOLUME knob
• Output Sources to feed the outputs with different signals
• Separate Main Equalizer and Monitor Equalizer
• "Monitor Cab Off", a global switch to bypass the virtual speaker cabinet individually for the MONITOR OUTPUT
By engaging "Monitor Cab Off" you can run the Profiler directly to a power amp driving a guitar cabinet on stage,
while the MAIN OUTPUTS still carry the full signal, including the virtual speaker, to be connected to the front mix-
ing desk. All the Output settings are global (or "locked") and consequently not saved with the Rig, but like all
other Modules, you can save Presets for the Output settings. Store and use individual Output Presets for specific
adjustments to suit different venues, studios or rehearsal rooms.
✔ ✔
Note: Read more about the Output settings and special applications in the Reference Manual.
(13)
(14)