Eq Module; Cabinet Module; Effects Section; Effect X - Kemper PROFILER Bedienungsanleitung

BUILDING A RIG 27

EQ Module

Hold the EQ button to bring it into focus. The soft knobs underneath the display control the following parameters
for the EQ.

Cabinet Module

The CABINET button brings the Cabinet Module into focus. You can freely combine cabinet profiles with amp
profiles from different rigs to create new stacks, as well as tweak "High Shift", "Low Shift", and "Character" for ev-
ery cabinet. You can find more information regarding the cabinet parameters in the REFERENCE MANUAL.

Effects Section

The Effects Section is where you can add stereo effects after (post-) the mono Stomps and Stack Sections. It
consists of the following Modules:

Effect X

Effect X can hold the same effects as Stomp A, B, C or D, but in stereo, which is especially useful with effects like
chorus that spread the sound over the stereo image.

Modulation

Modulation can also hold the same effects as Stomp A, B, C, or D, but in stereo. Profiler Head and PowerHead
are equipped with dedicated MOD RATE and MOD INTENSITY knobs to work specifically with modulation ef-
fects such as Chorus, Flanger, Phaser or Rotary Speaker. For this reason we recommend reserving this Module for
these types of effects.