Volume Pedal; Wah Pedal - Kemper PROFILER Schnellstart

14 PROFILER QUICKSTART

VOLUME PEDAL

So-called "expression pedals", which are optimized for digital devices like the PROFILER, should be used for all pedal
functions.
Connect your expression pedal to the PEDAL 1 input socket on the rear side of the PROFILER, or PEDAL 3 input on
your Remote. You will be able to control volume right away.
The functionality of the Volume Pedal, for example whether it is placed pre or post the amplifier, can vary by Rig.
Please find more information in a dedicated chapter about the Volume Pedal in the Main Manual.
When you bring your Volume Pedal down to heel position, the Tuner activates automatically, and you can tune your
guitar silently. This feature is optional and can be deselected in the Tuner Mode.

WAH PEDAL

Connect the expression pedal to PEDAL 2 of your PROFILER or PEDAL 4 of your Remote. From now on, this pedal
will control the expression of an effect. For instance, the position of your wah effect, or the pitch of pedal-pitch
effects, and also Morphing, which we will introduce in the next paragraph.
To complete this setup, you first need to dial up a wah effect in your current Rig. Now, bring an effect module into
focus as described in the above paragraph Adding Effects. Search for a wah preset by turning the BROWSE knob
and load it. The new effect will instantly respond to the pedal.